Removing White Glue Stains From Carpet
Mix 1/4 teaspoon mild liquid dish soap with one cup warm water.
Mix 2 tablespoons clear, white non-suds ammonia and 4 cups cold water.
How to remove white glue stains from carpet
- Scoop up and blot as much of the spill as possible, then vacuum up any dry particles.
- Prepare suggested cleaning solutions above, beginning with the first one listed.
- Test the cleaning solution on a small, inconspicuous section of carpet. We want to make sure the solution doesn’t cause any discoloration or damage!
- Apply the solution to a cloth, and use the cloth to apply the solution to the stain. For the best results, work from the outside of the stain toward the center.
- Leave the cleaning solution on the spill for at least five minutes, so it can work its magic.
- Blot with a clean white cloth until the stain no longer transfers. Be careful not to rub the stained area, or you might damage the carpet fibers!
- Rinse the spot with cold water, making sure all excess cleaning solution is removed from the carpet.
- If the stain is still visible, repeat the process until it is removed, or no longer transfers to the cloth.
- If the stain remains, mix the next solution on the list and follow steps 3-8 above. If the stain remains after trying both solutions, contact a professional cleaner.
- Once the stain is removed, layer white paper towels on the site to soak up any extra moisture. Weigh down the towels with a non-staining glass or ceramic object (think like a paperweight), and let them sit overnight.
- When the carpet is dry, vacuum the area to restore the texture.
- Give yourself a big high five. You did it!
Did the stain removal technique work for you? Yes | No